Roland Kruck on his way to his first Formula Extreme victory aboard our SP1.

Choose which make and model you want to see from the left. More and more charts will be added as we get them, with stock runs, comparison runs, before and after modifications and any other useful information we get a hold of.  This will provide you with a pretty good idea of what you'd expect to gain when considering enhancing your bikes performance. It will also guide you as to what works and what doesn't. We hope this can be of assistance. One thing is for certain, we only recommend what we KNOW works best from what WE see here on the dyno and at the track. Manufacturers can claim "X" h.p from "Y" mods, but we only use, sell and recommend what we see and know works right here for ourselves. The products we have chosen to import and distribute have been chosen because they have out performed everything else we've tested. In the past we have been offered many brands of exhaust to supply etc and turned them down because they didn't match or beat the products that we were currently using. We used Micron for a few years and always recommended them until we found Arata and Sato out of Japan. Not only was the detail to perfection in the quality just amazing, but they also beat the Micron systems in performance, which is what counts most in our book. So if you require pricing or any other information, you can click on the "contact us" link on the front page. 

We are the only Dynojet service centre in N.S.W with the proven in house race experience and championship winning results with Tuning Link, so give us a call now and get the most out of your bike today. Mapping costs are $300. We currently map bikes for the Factory Yamaha Supersport team and Superstock team of Bryan Staring and Pat Medcalf, as well as Grant Hay, Cole Odendal, James Spence, Cameron Keevers and more and have previously mapped bikes for Anthony Gobert, Ben Attard, Russell Holland, Glenn Allerton, Mark Aitchison, Warwick Nowland, Brendan Clarke, Rob Carrall, Wayne Maxwell, Roland Kruck (2001 F/Xtreme champion), Phil Courie (Filco ride days and service manager for Syd City m/cycles), Jamie Aitken, Zac Davies and many more. 

We also do mapping for other bike shops and their customers like Sydney City Motorcycles, Action Motorcycles, Aitkin's Motorcycles etc so when you want the best, come and see the best.

If you buy a PC from us and can't get it to us to be mapped, you can load a map on to the PC from the power commander website or elsewhere (use euro maps), for your bike and mods BUT keep in mind we have no way of knowing how much better it may or may not make your bike, as each bike is different and is best mapped on the dyno to measure what that specific bike requires in way of fuelling.

Ph: 0409 248895

Email: doinbikes@doinbikes.com.au